OFFICINA MECCANICA SESTESE S.p.A.
Via Borgomanero, 44,
28040
Paruzzaro (NO)
Italien
Italien
Unser Angebot
Produktkategorien
- 01 Glasherstellung/Produktionstechnik
- 01.13 Fördertechnik, Transporttechnik, Verpackungstechnik und Lagertechnik
- 01.13.04 Verpackungsanlagen - Kisten, Schrumpfen, Umreifen
Unsere Produkte
Produktkategorie: Verpackungsanlagen - Kisten, Schrumpfen, Umreifen
AT53
The automatic hooding machine model AT53 applies a hood of tubular stretch film to palletized product.
Its hot air generation system through linear gas burners is designed to work either with methane or propane gas (type approval number DG2217BL0557 issued by the German Gas Institute valid in all EU countries).
Hood preparation takes place on the back part of the machine, while hooding and thermoshrinking take place on the front side.
The AT53 machine is available with one, two or three coils of tubular film of the same, or different sizes.
All automatic and manual operations are managed through a PLC. The operator’s presence in necessary only to change the film coil.
Its hot air generation system through linear gas burners is designed to work either with methane or propane gas (type approval number DG2217BL0557 issued by the German Gas Institute valid in all EU countries).
Hood preparation takes place on the back part of the machine, while hooding and thermoshrinking take place on the front side.
The AT53 machine is available with one, two or three coils of tubular film of the same, or different sizes.
All automatic and manual operations are managed through a PLC. The operator’s presence in necessary only to change the film coil.
Produktkategorie: Verpackungsanlagen - Kisten, Schrumpfen, Umreifen
06RP
The automatic horizontal strapping machine OMS, model 06RP, automatically packs products with one or more thermos welded polyester or polypropylene straps.
The machine is developed and engineered according to the most modern design criteria and equipped with all devices to automatically carried out all strap feeding, centering, recovery, welding and cutting operations, as well as the strap compensation and tensioning device in order to ensures a uniformly on all the sides of the pack.
The strapping head (our patent), strap reel holders group and the touch screen control panel, for complete management, make this machine easy and performing.
The machine is it designed to be insert in fully automatic lines, where it exchanges signals with devices installed upstream and downstream, or can operate in total autonomy.
The machine is developed and engineered according to the most modern design criteria and equipped with all devices to automatically carried out all strap feeding, centering, recovery, welding and cutting operations, as well as the strap compensation and tensioning device in order to ensures a uniformly on all the sides of the pack.
The strapping head (our patent), strap reel holders group and the touch screen control panel, for complete management, make this machine easy and performing.
The machine is it designed to be insert in fully automatic lines, where it exchanges signals with devices installed upstream and downstream, or can operate in total autonomy.
Produktkategorie: Verpackungsanlagen - Kisten, Schrumpfen, Umreifen
08 Combo
The model 08 Combo is a combination of an automatic vertical strapping and turntable wrapping machine. The suitable solution for any needs regarding a low production with an high variable mix of products.
The 08 Combo model can be set to use the strapping heads, SONIC Plus / TR1400 / TR1400HD / TR1800 / TR2000 capable of handling Polyester (PET) or Polypropylene (PP) strapping based on needs.
Thanks to the welding & cutting device the cycle of this machine model completely automatic.
All the operating cycles of the machines and the individual devices may be programmed through a single operator panel.
Depending on the dimensions of product to be packing, the machines may be equipped with appropriate turntable diameter.
Pack size (standard machine)
Long side Min./Max.: 1200 mm
Short side Min./Max. 800 / 1000 mm
Height Min./Max.: 650 / 2200 mm
Max. pack weight: 2000 Kg
Available options:
Turntable: ø1800 o 2000 mm
High Paks: 3,000 mm
Teleservice module
The 08 Combo model can be set to use the strapping heads, SONIC Plus / TR1400 / TR1400HD / TR1800 / TR2000 capable of handling Polyester (PET) or Polypropylene (PP) strapping based on needs.
Thanks to the welding & cutting device the cycle of this machine model completely automatic.
All the operating cycles of the machines and the individual devices may be programmed through a single operator panel.
Depending on the dimensions of product to be packing, the machines may be equipped with appropriate turntable diameter.
Pack size (standard machine)
Long side Min./Max.: 1200 mm
Short side Min./Max. 800 / 1000 mm
Height Min./Max.: 650 / 2200 mm
Max. pack weight: 2000 Kg
Available options:
Turntable: ø1800 o 2000 mm
High Paks: 3,000 mm
Teleservice module
Über uns
Firmenporträt
Our History...
1949
In 1949 Maurizio Rossi and Luigi Cristina founded the company Officina Meccanica Sestese in Arona (Northern Italy). In those difficult post-war years, the Company undertook the important task of producing equipment and accessories for the brick and tile industry.
1958
OMS’ production soon asserted itself on the market so much that after a few years it became necessary to change premises. So, in 1958 a new plant was inaugurated in Arona where it continued to produce technologically advanced kiln equipment.
1962
First International Patent: “ Artiglio Fork” for bricks. Sold in all five continents.
1971
New Headquarter in Paruzzaro
1980
First Strapping Head Model R10
1990
AT62 New thermoshrink hooding machine
1992
Strapping Head Model TR14
1999
OMS celebrates its 50th Anniversary
2000
First Thermoshrink hooding machine AT53
2004
Acquisition of OMSTRAP in - Sandigliano (Biella), for strap and consumables production
2006
New Stretch hooding machine model IS43
2010
ISM bundle strapper, for the paper and cardboard industry
2014
The new high yield IS 46 stretch hooding machine
2018
Today, Officina Meccanica Sestese offers a complete range of end-of-the-line packaging machines and systems. Thanks to
the great reliability of its machines, guaranteed by years of experience, and its production versatility, OMS Group can satisfy all market requirements from the simplest strapping machine to the most sophisticated packaging system.
2019
Officina Meccanica Sestese celebrates its 70th anniversary.
An important milestone in our History.
1949
In 1949 Maurizio Rossi and Luigi Cristina founded the company Officina Meccanica Sestese in Arona (Northern Italy). In those difficult post-war years, the Company undertook the important task of producing equipment and accessories for the brick and tile industry.
1958
OMS’ production soon asserted itself on the market so much that after a few years it became necessary to change premises. So, in 1958 a new plant was inaugurated in Arona where it continued to produce technologically advanced kiln equipment.
1962
First International Patent: “ Artiglio Fork” for bricks. Sold in all five continents.
1971
New Headquarter in Paruzzaro
1980
First Strapping Head Model R10
1990
AT62 New thermoshrink hooding machine
1992
Strapping Head Model TR14
1999
OMS celebrates its 50th Anniversary
2000
First Thermoshrink hooding machine AT53
2004
Acquisition of OMSTRAP in - Sandigliano (Biella), for strap and consumables production
2006
New Stretch hooding machine model IS43
2010
ISM bundle strapper, for the paper and cardboard industry
2014
The new high yield IS 46 stretch hooding machine
2018
Today, Officina Meccanica Sestese offers a complete range of end-of-the-line packaging machines and systems. Thanks to
the great reliability of its machines, guaranteed by years of experience, and its production versatility, OMS Group can satisfy all market requirements from the simplest strapping machine to the most sophisticated packaging system.
2019
Officina Meccanica Sestese celebrates its 70th anniversary.
An important milestone in our History.